Gears can be produced by the various casting processes. Sand casting is economical and can take up large size and module, but the gears have rough surfaces and are inaccurate dimensionally. The gears are used in machinery where operating speed is low and where noise and accuracy of motion can be tolerated, for instance, farm machinery and some hand operated devices. Sand casting is suitable for one-off or batch production.
Large quantities of small gears are made by “Die casting”. These gears are fairly accurate and need little finishing. However, the materials used are low melting ones, such as an alloy of zinc, aluminum, and copper. So, these gears are suitable for light duty applications only, for example, gears used in toys, cameras, and counters, etc. gears made by investment casting may be accurate with good surface finish. These can be made of soft materials to withstand heavy loads. Moderate-sized gears are currently being steel cast in metal molds to produce preforms which are later forged to size. Light gears of thermoplastics are made by injection molding. This method is suitable for large volume production. However, gear tooth accuracy is not high and initial cost is high. These gears find their use in instruments, , etc.
For phosphor bronze worm wheel rims, centrifugal casting is used far more extensively than any other method. Centrifugal casting is also applied to the manufacture of steel . Such perform well as rolled and are usually less expensive.
Shell molding is also sometimes used to produce small and the product is a good cast of somewhat lower accuracy than one made by investment casting but much superior to sand casting.
The methods of forming include:
roll forming method
extrusion method, &
cold forming method.
These three methods are the popular ones, the details of each of them will be discussed in our subsequent articles, while the other methods not mentioned will also be treated.
Do not forget to air your view through the comment form below this post, for interaction purpose.
Originally posted 2018-03-16 17:31:54.
A mechanical engineer and an NDT inspector by profession. However, I love blogging and sharing of knowledge for human intellectual development, especially relating to engineering fields, environment, and science trending updates. “Engineeringall.com” is a platform for any individual with similar passion, to do so; use the “PUBLISH YOUR ARTICLE” page at the MENU to share your personal ideas, researched knowledge, or discovered incidents, etc.to those in the engineering & & the general online communities across the globe. If you love this post please share using the social buttons below.