Metal forging is simply the process of reshaping a metal to obtain a particular shape, this process can be carried out in various ways depending on the type of metal and the handling process intended for such metal. Metal forging has a lot to do with the of the metal. Generally, it can be assumed that ferrous metals have higher crystallization than non-ferrous metals, for that reason forging non-ferrous metals could be easier when compared with ferrous metals.
If one intends to make metal forging effective then, such should consider the application of heat in the process. The application of heat in metal forging will not only make the easier but would also enhance the re-arrangement of the metal’s crystal structure.
When a metal is heated to a that makes is easy for deformation of such metal, it means the crystal structure was allowed to take the new shape gradually, instead of deformation in the cold condition.
FORGING MAY BE DESCRIBED IN TWO TERMS;
HOT FORGING AND COLD FORGING
Though they sound differently or opposite in meaning, the fact still remain that the two still make use of heat, the difference is the each one is exposed to;
This process of forging is when the metal had been heated above its recrystallization (the that the crystals would not be able to return to their initial positions after cooling) before carrying out the forging on it. It is the best method of forging for very hard metals which may be hard to forge at lower temperatures, an example of such metals are, iron and steel.
This process involves the forging of metals at a that is below the re-crystallization point, at this the metal still has the tendency of retaining its rigidity and crystal positions but due to the effects of forging the crystals positions will be forcefully changed to a new position. This type of forging is usually applied to metals with lower melting points, but it has the disadvantage of causing an increase in the brittleness of the metal after the forging and cooling of the metal.
The negative effects created on metals after forging such as increased brittleness and decreased malleability can be corrected by heat treatment techniques, which we shall discuss next time.
HOW TO MAKE MONEY WITH METAL FORGING BUSINESS
Best ways to with metal forging are:
- Incorporating it into activities;
The main aim in metal deformation is to obtain a new shape, that is why every technician would love to have full control on the mobility of the metal molecules, and such could be obtained directly using . Therefore, using in the heating process for forging would help large and entire parts to be heated quickly, and at a very high , so for such, it would be easier to do lots of shaping jobs within a short time.
- Practice the forging of important /machine parts
One of the lucrative that can be developed through forging is the crane hooks, others are flywheels, anvil, hammerheads, torque wrenches, hoe, diggers, shovel, etc. these parts can cost much in the market having a buyer that sells them to final consumer can make your hobby a lucrative employment for you.
For more information on how to make money with metal forging,read our previous post on HOW TO START A FOUNDRY INDUSTRY IN NIGERIA
Your own idea contributions through comments will be appreciated.
Originally posted 2017-09-18 14:20:24.
A mechanical engineer and an NDT inspector by profession. However, I love blogging and sharing of knowledge for human intellectual development, especially relating to engineering fields, environment, and science trending updates. “Engineeringall.com” is a platform for any individual with similar passion, to do so; use the “PUBLISH YOUR ARTICLE” page at the MENU to share your personal ideas, researched knowledge, or discovered incidents, etc.to those in the engineering & & the general online communities across the globe. If you love this post please share using the social buttons below.