Skip to content

Top 10 Major Causes Of Building Collapse In Nigeria(2022)

ALL YOU NEED TO KNOW ABOUT CRANES

What are the Causes Of Building Collapse In Nigeria?

This may probably be the question you are asking. Building collapse in Nigeria has become a consistent occurrence with a heartbreaking record annually.

Statistics show that Nigeria has recorded roughly 50 cases of accidental building collapse in the last five years with the highest figure coming from Lagos state.

This post will be highlighting the top ten (10) identified possible causes of building collapse in Nigeria.

The List of the Top 10 Possible Causes Of Building Collapse In Nigeria

  1. SAND / CEMENT MIXTURE
Causes Of Building Collapse In Nigeria: cement bags
Causes Of Building Collapse In Nigeria: cement and sand

In the making of blocks for building, it is very important to consider the number of blocks to be molded per cement bag, if you are using hollow blocks that call for a higher concentration of cement in the sand.

Why it is better you mold the blocks yourself to be sure of the quality of what you are putting on the ground.

Some molders in Nigeria can 6inch block 30pcs per a bag of cement while some for-profit purposes can mold 45peices per a bag of cement believe me these two blocks can never be of the quality both in strength and durability.

The worst that could happen to a builder is; if the blocks are purchased from block industries and their mixture ratio is unknown.

Also, their method of compression, especially if it is not good enough. You may end up building a structure that could collapse at any moment.

Hence, if you are a builder and want to use blocks from block industries it is very important to know the block industry supplying the block, their location, and the guarantee of quality.

But the best is to visit the industry to see their cement and sand mixing ratio, their method of molding either with a machine or manual method.

In Nigeria, most block industries can produce very good blocks with the required cement and sand ratio according to your request and money.

Meanwhile, some builders that want to save money would be seeking the ones with less prices from these block industries. In the end, they end up having blocks with a low cement mixture that were only compressed by the molding machine.

 2. SOIL TEXTURE
HIDDEN GARDEN SENSOR FOR FARMERS
Causes Of Building Collapse In Nigeria: HIDDEN GARDEN SENSOR FOR SOIL TEXT

The soil test of the ground you want to build a house is very important for the sustainability and integrity of the house.

There are many methods of checking for the soil texture but most engineers use this simple method of bringing a small sample of the sand squeezing it in their palm forming a ball or round shape of that sand with the addition of little or no water.

Then placing it inside a bow having clean water inside it to cover the round-shaped soil in it. The period it takes for the sand to dissolve inside the water will be timed with a stopwatch to obtain the texture of that particular soil.

This test is very crucial before erecting any structure on that soil. This is because if the soil dissolved quickly in the water, it means it a sandy soil or contains more properties of sand soil which mean more attention is to be placed on erecting the foundation using many support techniques.

However, in the case of the sand taking a very long time to dissolve it means it is muddy sand which is very good in erecting a structure, such sand only need a good digging for the foundation.

It is always good as an engineer to know the soil texture you are building on especially if the building will be upstairs like a duplex, multiple stairs building.

  1. POSITIONING OF BUILDING
Causes Of Building Collapse In Nigeria: SIMPLE BUILDING PLAN FOR A 3-BEDROOM FLAT
Causes Of Building Collapse In Nigeria: Position of the Building

Every land has the four cardinal points located on it which are the south, north, east, and west, an engineer should use an appropriate wind detecting device to access the wind movement on the site location.

Know the wind direction as well as speed in the morning, afternoon and night, if there will be enough chance you can even take the data for the four annual seasons, i.e.; autumn, summer, spring, & winter.

Though the effects of the wind on the building are not so visible, a very tall building positioned against the wind direction. The foundation will act in form of silent vibration each time the wind is very high. Thus the weakening of the foundation.

This is why the wind must be put into consideration. The only way to reduce the effects of the wind is to position the building in a way that would not stand against the incoming wind or streamline the position of the house in the direction the wind force is very high.

Also, enough strength must be given to the foundation of the building.

  1. POOR QUALITY OF CONCRETE
Causes Of Building Collapse In Nigeria: Why grasses grow on concrete/cemented walls and Floors
Causes Of Building Collapse In Nigeria: Poor quality of Concrete

Standard concrete has to be the standard ratio for the method of forming concrete for pillars and decks of buildings.

Note; there is a big difference between the mixture for block making and that of concrete, Concrete is what we use in forming the pillars, foundations, and the decks of the building (for tall buildings.)

The standard concrete ratio is 1 Cement bag (50kg): 2 Sand: 3 gravel, what this simply means is that your concrete is supposed to have more gravel in percentage than sand, but for economic reasons most builders violet this standard due to the fact that gravel is more costly than sand, or for other reasons.

Most builders use 1 bag of cement: to 6-8 buckets (20litres size buckets) of sharp sand, then 10-12 buckets (20litres size buckets) of gravel (limestone, or ironstone).

They are properly mixed and added with enough water to obtain a good mixture. 

Please note; too much water can destroy the strength of the concrete as some portions of cement which act as a binder would flow away after pouring the concrete leaving only sand and gravel.

Hence it is advisable to watch the water you are adding and stop once you observe the concrete to be mixable with a shovel or concrete mixing machine.

Meanwhile, poor water condition or insufficient water in the concrete can make it very difficult to mix, and causes porosity in the pillars after pouring, also can cause the concrete to be non-uniform after the mixing.

It is necessary you use a vibrator or poker while pouring concrete to ensure the whole content goes inside to form the pillars, foundation, etc. leaving no room for porosity after the drying of the concrete.

Besides the avoidance of porosity these machines enhance the surface finish of the concrete. It is necessary to ensure the gravels size is reduced very well to ensure a lack of porosity in the concrete and a good surface finish.

Having obtained a good concrete mixing method it is important to put into consideration the fact that method and size of the rods in which the concrete is to be poured speak volumes about the integrity of the pillars, decks, etc.

Hence it is very necessary that a good iron or steel rod binding method be used and ensure the size of the rod is according to the capacity of the load the pillar, decking, foundation, etc., would carry when subjected to use for forever, this is why proper considerations and calculations must be given to this section.

  1. ABANDONING BUILDINGS UNDER CONSTRUCTION FOR A VERY LONG TIME.
ALL YOU NEED TO KNOW ABOUT CRANES
Causes Of Building Collapse In Nigeria: Abandoning building for along time

Most buildings are abandoned after reaching a particular stage due to the shortage of finance or for some other reasons.

But whatever the reason may be a building is not good to be left halfway, the blocks that are laid to form the walls of the uncompleted building will be exposed to the continuous rainfalls during the rainy season.

The hot sun during the dry season and other harsh weather conditions which will assist in the weakening of the strength of the walls thereby forming a long transverse crack on the wall.

The cracks a5rre not the only problem developed by an abandoned building, the cases of the top block layers being washed off as a result of continuous rainfall and the movement of reptiles like a lizard at its surfaces also contribute to the washing off.

A building left for a very long time uncompleted tends to lose its hold on the blocks forming the walls of the building hence a particular block of any wall can easily fall at any serious vibration of the wall, this is very common in the case of an uncompleted building that the roofing components are not yet fixed.

Most Nigerian builders do not put these factors into place hence they encourage the client to proceed with the guarantee that the long-term abandoning of the structure has not affected its strength. This advice sounds good in the ear of most clients as it serves to save more money for the building projects.

If you want to build a good house or structure please ensure you complete it to plastering level within five years intervals because of anything more than that the integrity of that structure cannot be guaranteed.

  1. EROSION AND FLOODS
Top 10 Major Causes Of Building Collapse In Nigeria(2022)
Causes Of Building Collapse In Nigeria: Erosion and flood
Top 10 Major Causes Of Building Collapse In Nigeria(2022)

One of the problem in most Nigeria environment is the seasonal rise in water level which most times causes flooding of the environment, houses, farmlands, etc. this usually occurs from July to November of every year.

Though not every part of the country is involve but the one that occurred in the year 2012 was so much that houses, roads, and other structures were covered with flood for months in almost different locations of  20 states out of the 36 states in the country.

It was noted that immediately after the flood disappeared most of the Nigerian roads became unmovable.

The current of the moving water that followed the flood was able to carry many household properties to big rivers where they are lost forever, while most building roofs was completely removed by the flood.

The same force that followed the moving caused the wall of the most building to collapse while some got cracked immediately after the flood.

This is why flood contributes to one of the reasons why most Nigeria building collapse as most builders do not put this factor into consideration when the building projects is ongoing, while those that put it into consideration will have their structures standing very strong even after the flood has occurred for many years.

Another contributor is the rainfall; during the serious rainfall season that usually comes with a mighty wind, the structures are subjected to serious threats by the erosion that follows the rainfall thereby causing washing away of most of the soil and creating a big environmental deformation and uneven soil surface.

  1. DEEP-ROOTED TREES
Roots, Solid, Tree, Nature, Wood, Growth
Causes Of Building Collapse In Nigeria:Deep-rooted trees

It is a common thing in a typical African environment to have trees around the building to act either as a shield for resting outside the house or to become a source of supply for fruits like; mangoes trees, cashew trees, avocado pear trees, orange and coconut trees, etc.

While all these are good and healthy it is important to note that when the roots of these trees have grown so deep and wide, and if they are very close to any part of the building they exert a great force on that part of the building.

Hence causing either crack or weakening of the part of that building. If such trees are left further to grow very wide in size the cracks created on the ground could extend to the height of the building, and that will be another source of building collapse.

  1. VIBRATIONS
Wellness, Line, Balance, Waves, Circles
Causes Of Building Collapse In Nigeria: Vibrations

If a building is located very close to where earth breaking and heavy-duty equipment or machine is operated such as the factory, railway, and construction industries, etc. the building foundation will be subjected to constant vibration which then weakens the foundation over a period of time.

The effect of vibration in the collapse of buildings is not an instant action, it is long time damage to building foundations that gradually surface after a long period of time.

  1. ACCIDENTS
WHAT HAPPENS DURING EARTHQUAKES, ALL YOU NEED TO KNOW
Causes Of Building Collapse In Nigeria: Accident Caused by external factor

Just like any other structure when a building is accidentally stroked by any heavy object like trees, masks, etc. maybe they fall as a result of the wind or other causes.

Many factors give rise to the accidental collapse of buildings in Nigeria but the most common of them is that of falling objects like trees, etc.

This is the reason why most Nigeria builders and engineers consider the surrounding of any land before putting the building in it, and many engineers do not encourage having deep root trees within the compound, except at a very far distance from the building.

  1. ECONOMIC REASON

The importance of the economy in a building projects cannot be overlooked, but that should not be placed above the safety and the durability of the house.

Most builders economize to the detriment of the owner the by using substandard and low priced materials which end up putting the house in an unsafe situation and exposes it to collapse easily by any of the factors that cause building collapse, this is the major cause of most building collapse in Nigeria.

Conclusion

The above ten points actually highlight the Major Causes Of Building Collapse In Nigeria. In case we are missing some points, use the comment section to give us feedback.

6 thoughts on “Top 10 Major Causes Of Building Collapse In Nigeria(2022)”

  1. Wonderful blog! I found it while searching on Yahoo News.
    Do you have any suggestions on how to get listed in Yahoo News?

    I’ve been trying for a while but I never seem
    to get there! Many thanks

  2. My programmer is trying to convince me to move to .net from
    PHP. I have always disliked the idea because of the expenses.
    But he’s tryiong none the less. I’ve been using Movable-type on a number of websites for
    about a year and am worried about switching to another platform.

    I have heard good things about blogengine.net. Is there a way I can import all my wordpress posts into
    it? Any help would be really appreciated!

  3. Thank yoս for every other informative blog.
    The place else mаy I get that type of info written in such a perfect method?
    I’vea undertaking that I am just now working on, and I’ve been at the look ᧐ᥙt for
    such information.

Leave a Reply

Your email address will not be published. Required fields are marked *

error: Content is protected !!