Learning how to drive has never been easy, but not for smart people who would consider making a try than paying the usual huge money to driving schools which always cost up to N15, 000 in . Let us discuss briefly what you need to know about driving, let the option of making a trial rest on you being the reader in search of such information.
Before embarking on making such trial you need to first familiarize yourself with functions of all the various parts and buttons within the driver’s seat and even other locations. For this reason, let us first of all list some of the major parts within the driver’s seat and their functions;
STEERING WHEEL / ARM: it is the round steel or iron handle located just opposite the driver, the steering arm is the last linkage made in the steering system of automobiles. It has a long shaft which can either be made with a solid or hollow pipe, and this shaft helps the steering system to transmit the imparted by the driver on the steering arm to the steering system thereby helping the to make a smooth turn with less effort from the driver.
BREAKING UNITS: brake enables it to slow down and make a stop. There are two places where the brakes of the are located;
The large foot pedal located on the left side beneath the driver’s foot; the pedal is used for slowing down the to bring it to a stop. Pressing your foot on the pedal will slow down the but pressing and holding your foot on it will be the to an eventual stop.
Hand break: by the right-hand side of the driver, there is a handle which looks like a lever arm, the handle is known as; handbrake or emergency brake or parking brake. The function of that break is to lock the once it has stopped at a particular point. The locking will ensure the never makes any move once parked in a place, therefore; some refers to it as a parking brake.
STICK: the stick is used to change the , it is located just at the resting position of the right hand of the driver, it looks like a joystick but has slots of longitudinal lengths, represents the numbers, hence moving the stick to any of means change of to the number indicated on the . It is always advisable to move the stick to the indicated “0” once the is parked for safety reasons.
DRIVER’S DASHBOARD: it is the plastic made material located just opposite the driver which bears several items on it including the following; fuel gauge indicator, speedometer, RPM gauge, gauge, and air vents controls. The board also bears buttons for controls, radio/CD player, and other things which may be included based on the brand. The functions of all the buttons were indicated on them.
IGNITION KEY: the ignition key is where the can be started before turning the stick. For the majority of ; the ignition key is located just below the steering arm. To start the , the key into it, turn it twice and hold it at the last turn, the will start.
THE : the is used to blow the horn located at the forefront of the bonnet, but the button which activates the horn is located just on top of the steering arm. The steering arm usually has a joining in its circular shape, just on top of that joining that is where the horning button is located, placing your hand on it will activate the horn.
SEAT ADJUSTING HANDLE: located just by the side of the seat, it is used to position the seat at any angular position you desire ranging from 30 degrees to 90 degrees.
SEAT : the seat is visible to anyone, it is usually closing the seat either transversely or horizontally when put on, the seat can be put on by dragging its pin side and slotting it into the locking hole at the other side of the seat.
GLASS CONTROL BUTTON: located on the left-hand side of the driver, just attached at the door meant for the driver’s entrance and exit. The button automatically raises all the glasses on each door or lowers them and that can be done by pressing and holding hand on the button. However, there are other buttons in the same location to perform the same function but they are usually assigned to a single door for each button. Therefore, from the driver’s door side you can lock or open other , lower or raise their glasses, etc.
THE SIDE : the side mirror is another mandatory part of the driving experience, the can be been on either side of the front , they were made with diverging which enables them to make close objects to appear a bit away from the original distance, the reason is to enable the driver get a full view of what is happening behind the vehicle. So to drive any , learn to understand how the side mirror works and how to it to enable focus viewing while driving.
Having learned some the basics mentioned above, let us proceed to how you can safely drive a with transmission.
- The seat at the driver’s seat, try to make yourself as comfortable as possible in that seat by adjusting it at the different angular degree to know the angle that best suits you. if your two legs can comfortably press the two pedal below the driver’s seat. Assuming all have been done successfully move to the next level.
- Put on the seat , and ensure all the safety measures are in place, such as checking to ensure the is not in , the were closed properly etc.
- Insert the key into the ignition key and turn on the to start it. Before then, use your right foot to hold on the brake pedal below the driver’s seat.
- Gently move the stick to the lowest available, then gently your leg and notice that the has started moving.
- While moving at low speed, try to make turns by steering the in the desired direction.
- To increase the speed of the , match and hold-on the acceleration pedal.
With the above explanations, it is assumed that the can be driven safely. However, if there is any confusion or area needed to be addressed, do not forget to drop it as a question in our forum or a comment in this post. Also, other readers view and contributions are acceptable and can be appreciated.
A mechanical engineer, an NDT inspector, Graphic designer & Web developer, I love and sharing of knowledge for human intellectual development, especially relating to fields, environment, and science trending updates.
“Engineeringall.com” is a , to do so; use the “PUBLISH YOUR ARTICLE” page at the MENU to share your personal ideas, researched knowledge, or discovered incidents, etc.to those in the & & the general online communities across the globe. If you love this post please share using the social buttons below.